Changes in BuildingWidelandsUnderWindowsNew
Editor Comment
Created new section "Building with MSys2 only" plus a bit of cleanup
Revision Differences of Revision 34
# How to build Widelands with MSys2/MinGW64 on Windows ¶¶
This is currently a work in progress! ¶
¶
[TOC] ¶
¶
# Building with MSys2 only ¶
¶
# Building with Nuwen's MinGW64 distro ¶
¶
## Download files ¶
### Nuwen's MinGW64 distro ¶
¶
Download the main distro from [http://nuwen.net/mingw.html](http://nuwen.net/mingw.html) and the MSYS2 installer: ¶
¶
* [mingw-13.4.exe](http://nuwen.net/files/mingw/mingw-13.4.exe) ¶
* [MSYS2](http://repo.msys2.org/distrib/x86_64/msys2-x86_64-20150916.exe) from [MSYS2.io](https://msys2.github.io) ¶
¶
### CMake and Ninja ¶
¶
* Download [Ninja](https://github.com/ninja-build/ninja/releases/download/v1.6.0/ninja-win.zip). Extract simply to `C:\\MinGW\\bin`. ¶
* Download [CMAKE](https://cmake.org/files/v3.4/cmake-3.4.1-win32-x86.zip) ¶
¶
### Widelands source code ¶
¶
* This is described on [[ BzrPrimer ]] ¶
¶
### SDL2 source packages ¶
* [SDL2](https://www.libsdl.org/release/SDL2-2.0.3.zip) ¶
* [SDL2_net](https://www.libsdl.org/projects/SDL_net/) (For Build 19 and older) ¶
* [SDL2_mixer](http://www.libsdl.org/projects/SDL_mixer/) ¶
* [SDL2_image](https://www.libsdl.org/projects/SDL_image/) ¶
* [SDL2_ttf](https://www.libsdl.org/projects/SDL_ttf/) ¶
¶
### Additional libraries ¶
* [gzip](http://ftp.gnu.org/gnu/gzip/gzip-1.6.tar.gz) ¶
* [libiconv](http://ftp.gnu.org/gnu/libiconv/libiconv-1.14.tar.gz) ¶
* [gettext](http://ftp.gnu.org/gnu/gettext/gettext-0.19.6.tar.gz) ¶
* [freetype](http://download.savannah.gnu.org/releases/freetype/freetype-2.6.2.tar.gz) ¶
* [ICU](http://download.icu-project.org/files/icu4c/56.1/icu4c-56_1-src.zip) ¶
* [GLEW](http://glew.sourceforge.net/) or glbinding ¶
¶
## Set
¶
* Use the self-extracting installer of Nuwen's and extract the distro to `C:\MinGW` ¶
* Install MSYS2 to `c:\msys2` and follow their [update steps](https://github.com/msys2/msys2/wiki/MSYS2-installation#iii-updating-packages)! ¶
* Open the distro window with `C:\MinGW\open_distro_window.bat` ¶
* In this shell change the directory with `cd c:\msys2` and call `msys2_shell.bat` or `msys2_shell.cmd` to start MSYS2, depending on your version of MSYS2. ¶
* You are now in a linux like shell, so the command syntax is a bit different than normal windows commands ¶
* Call `pacman -S diffutils` to make sure that the "cmp" and "diff" commands are available. The libraries will need those to configure themselves - you will probably get errors like "./configure: line 5988: cmp: command not found" otherwise. ¶
* Call `gcc --version`. If the reply is `bash: gcc: command not found`, you will need to add it to the path with `export PATH=${PATH}:/c/MinGW/bin`. Do this every time you start MSYS2. ¶
¶
¶
## Build
¶
¶
* Extract all source packages to `c:\msys2\home\<username>\` ¶
* Build each package with `./configure --build=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 --prefix=/c/MinGW && make install` ¶
* Gzip1.6 does not compile without these [two patches](https://gist.github.com/TinoM/5692d59573269e6d8018) ¶
* Download the patch files, save them in the gzip source folder and patch with ¶
* patch -d . -p1 < gzip_mingw64.patch ¶
* patch -d . -p1 < gzip_mingw64_2.patch ¶
* Libiconv and freetype have circular dependencies, so you should compile libiconv, then freetype and then libiconv again (run `make distclean` and `./configure`) ¶
* libiconv: If you get a warning `remember to run 'libtool --finish /c/MinGW/lib'`, just run that command when the install has finished. If you don't have libtool, `pacman -S libtool` will fix that for you. ¶
¶
##
¶
¶
* You will need to execute `export PATH=${PATH}:/c/MinGW/bin` within MSYS2. You can run `gcc --version` to check that it's there ¶
¶
###
* If compiling fails due to problems with the `INSTALLDIR` macro, track down the files and replace the macro with the hard-coded path, e.g. replace all instances of `const char *orig_installdir = INSTALLDIR;` with `const char *orig_installdir = "/c/MinGW";` (solution from [Chinese site](https://www.cnblogs.com/paktc/p/5997500.html)) ¶
¶
###
* icu4c-61_1 will not compile on MinGW, use icu4c-56_1 as linked above. ¶
¶
###
* If you get lots of warnings like "undefined reference to `oggpack_write'" etc, you'll need to get and compile [libvorbis](https://xiph.org/downloads/) ¶
¶
###
* I kept getting an error "libobj name `IMG.Tpo -c -o IMG.lo IMG.lo' may not contain shell special characters." that would not go away. They provide ready-made development packages though (SDL2_image-devel-2.0.3-mingw.tar.gz (MinGW 32/64-bit)), so try grabbing one of those. I tried fixing the error by compiling the depencies. Ran into some trouble with the dependencies too and am documenting it here, just in case it will come in useful: ¶
* [libtiff](https://gitlab.com/libtiff/libtiff) No problems ¶
* [libjpeg](http://libjpeg.sourceforge.net/) `cannot create regular file '/c/MinGW/man/man1/cjpeg.1': No such file or directory`. Simply create the `C:\MinGW\man\man1` folder and run `make install` again ¶
* [libpng](http://libpng.org/pub/png/libpng.html) Get a tar distribution, or there will be no configure available. `pnglibconf.h:205:54: error: expected identifier or '(' before '-' token` - Open pnglibconf.h and delete the extra line breaks, so that every #define statement is in a single line ¶
* [zlib](https://www.zlib.net/) Does not use autotools, so the configure command is `./configure --static --64 --prefix=/c/MinGW`. Then `make install` as usual ¶
¶
###
* Install perl `pacman -S perl` ¶
* Compiler complains about `LOCALE_ALIAS_PATH` and `LOCALEDIR`: Replace `LOCALE_ALIAS_PATH` and `LOCALEDIR` with `"/c/MinGW/share/locale` in: ¶
* gettext-runtime/intl/dcigettext.c ¶
* gettext-runtime/intl/localealias.c ¶
* gettext-runtime/intl/os2compat.c ¶
* gettext-runtime/intl/os2compat.h ¶
* Compiler complains about `INSTALLDIR`: In `gettext-runtime/intl/relocatable.c`, delete all instances of `&& defined INSTALLDIR` and then replace `INSTALLDIR` with `"/c/MinGW/lib"` ¶
* "undefined reference to \`__imp_pthread_rwlock_unlock'" - Get the [precompiled pthreads binary](https://sourceforge.net/p/mingw-w64/wiki2/Compile%20pthreads/) and dump it into `C:\MinGW` ¶
* `aclocal-1.15: command not found`: Install autotools `pacman -S automake m4 autoconf` ¶
* Problems with an `sed` command: ¶
* Call `cd gettext-runtime` and compile gettext from there ¶
* The error is coming from `gettext-tools` - you can grab those from MSYS2 by copying `msgfmt.exe` and `msgmerge.exe` from `C:\msys64\mingw64\bin` to `C:\MinGW\bin` - that will be enough to make CMake happy. If you want to build `.pot` catalogs, you will also need `xgettext.exe`. ¶
* The above error looks like this: ¶
~~~~ ¶
} > math.h-t && \ ¶
mv math.h-t math.h ¶
/usr/bin/sh: -c: line 214: syntax error: unexpected end of file ¶
make[4]: *** [Makefile:4294: math.h] Error 1 ¶
~~~~ ¶
¶
* In case you're still having trouble, you can try the [MSYS2 patches](I have found a series of patches: https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-gettext) ¶
¶
#
¶
* Download [Ninja](https://github.com/ninja-build/ninja/releases/download/v1.6.0/ninja-win.zip). Extract simply to *C:\\MinGW\\bin*. ¶
* Download [CMAKE](https://cmake.org/files/v3.4/cmake-3.4.1-win32-x86.zip) ¶
¶
# Getting Widelands source code ¶
¶
* This is described on [[ BzrPrimer ]] ¶
¶
¶
We will build ninja in the normal distro window and not in the MSYS shell: ¶
¶
* Open the distro window with `C:\MinGW\open_distro_window.bat` ¶
* Switch to the directory you'll want to build widelands in, e.g. `C:\wl_build` ¶
* run CMAKE `cmake -G Ninja -DCMAKE_PREFIX_PATH=C:\Mingw c:\bzr\widelands\trunk`. Important CMake options are documented on the [BuildingWidelands](https://wl.widelands.org/wiki/Building%20Widelands/#cmake-options) page. ¶
* For building with GLEW, add the CMake option `-DOPTION_USE_GLBINDING=OFF` ¶
* Just call "ninja" to build now