Latest Posts

Changes in Technical FAQ

Editor Comment

link correction


Revision Differences of Revision 10

## Playing Widelands - general ¶

[TOC] ¶

### How to start Widelands? (I downloaded Widelands but don't know how to start it) ¶

Take a look at the [DownloadPage](/wiki/Download) ¶

If Widelands doesn't start correctly it might be that some required libraries aren't installed (or aren't installed correctly). ¶
In most of these cases the output on the console/terminal/bash might be useful. Open your favourite terminal application, move to Widelands directory and try to run Widelands via ./widelands. ¶
It will then either run correctly or inform you about missing dependencies. ¶


### Is it possible to prevent the game from running at 100 percent of CPU usage even if nothing at all is happening, like in the main menu? ¶

Since Build13 there is an option allowing you to set a value for the maximum of frames that may be drawn per second. ¶
At current state a "maxFPS" of 14 seems to be the lowest value you can use without causing jerky graphics. ¶

If you use a version older than Build13 you should really update, as this point is only one out of many improvements in our current release. ¶


### How do I set the resolution to 800 x 800? ¶
There is no "legal" solution - as 800 x 800 is not a "normally" supported resolution of a graphics card you may not set it via the options menu. ¶

There is a workaround, through editing the conf-file, which can be found in ~/.widelands under Linux or in Widelands directory under Windows. There you can change the following variables to the solution you want: ¶

xres=800 ¶

yres=800 ¶

__Attention:__ ¶

in windowed mode this change is unproblematic but __DON'T__ test it in full-screen: it can destroy your hardware! ¶

### The progress in Widelands games is slow! Will you supply a <speed-things-up> button? ¶
This is already implemented as a keyboard shortcut. With Page-Up/Page-Down keys one may increase or decrease the game speed. This is a discrete speed setting from zero to very very fast. The current game speed is displayed at the upper-right corner of the screen; no text there means normal game speed. ¶

If you're using an Apple Macbook that doesn't have Page-Up and Page-Down keys, you can instead hold down the Fn key and press the Up or Down arrows to control the speed. ¶


### Where are my maps and savegames stored? ¶

Widelands creates a directory in the users home folder where it saves all user specific data like settings, maps, savegames, replays and screenshots. On Linux this directory is `/home/<username>/.widelands`. The directory is normally hidden so you might have to set the option to show hidden files. On Windows the directory is typically `C:\Users\<username>\.widelands`. In both cases replace `<username>` with your actual username. ¶

## Playing Widelands multiplayer ¶

### How can I play online? ¶
In recent Widelands versions, you should be able to join into the Widelands metaserver lobby. There you can list other players and games, chat with other players and join or open a new game. ¶

Special notes on internet gaming via the metaserver can be found at the InternetGaming page. ¶

Alternative you can use the LAN/Direct IP interface to start a server. This is the standard network interface for older Widelands versions - Start a server (click on "Host a new game") on your computer and give the other player(s) your IP address, or type in the IP address of a player hosting a game and click on "Join this game". ¶


### How can I register for the metaserver or change my password? ¶
The metaserver uses the registered users of our website (this website :) ), so if you are registered on this website, you can set a password for the metaserver [here](http://wl.widelands.org/ggz/changepw). (Normally reachable via the ["Edit Profile"](http://wl.widelands.org/profile/edit/) link on the right side.) ¶

**ATTENTION ABOUT PASSWORD SECURITY:** We suggest to use a different password than the one you set for the website, as the metaserver password is currently saved in cleartext (by Widelands and the metaserver) ¶


### Where can I find opponents? ¶
Best join us on our IRC channel (#widelands on freenode.net - or via our [web chat application](http://wl.widelands.org/webchat/)). There are often other players waiting for someone to play with - just ask around :-) ¶

You can also start a thread in our [player forums](http://wl.widelands.org/forum/) - which might be the best if you just plan to play online later :-) ¶


### We have problems connecting to a Widelands host ¶
Make sure that Widelands is not blocked by a firewall (on both host- and client- side). On some firewalls you might be able to open specific ports - try to open port 7396 for TCP and UDP. ¶

You may also be using the Internet via a router or a proxy server. If that's the case you need to forward the above mentioned ports to your computer. [link to Wikipedia - port forwarding](http://en.wikipedia.org/wiki/Port_forwarding) ¶


### We get "out of sync" errors in a multiplayer game right from the start ¶
Make sure all participants have __exactly the same version__ of Widelands and no other (older) Widelands version is present in any other directories on the system. ¶

If you use a Widelands version older than Build15 and try to load a savegame or want to play a self-created map, please make sure everyone has exactly the same version of this file. It is important that you copy the version from one computer to all other computers. ¶



## Widelands and Settlers ¶

### Is Widelands like Settlers II? ¶
Yes, because ¶

* it offers the same game style! ¶
* it offers a similar user interface ¶
* the maps look similar ¶

No, because ¶

* it is bigger than S2 ¶
* it has different tribes with different economies ¶
* it offers multiplayer ¶


### The worlds of Settlers 1 were "continuous". Are there any plans for Widelands to be like that, too? ¶
Widelands is already "continuous" like Settlers 1, so there is no border at the "end of the map" like in Settlers 2. ¶
Theoretically you could expand so far that you can build a web of streets until you connect the "right side" with the "left side" of the map. ¶


### I have read that it is possible to use old .swd maps from Settlers. I have Settlers 2 Gold, with .wld maps. Is it possible to use these maps as well? ¶

Yes, since Build13 *.wld-maps are supported as well. Please be aware that the Widelands engine behaves different than Settlers 2, so it might be that some maps are incompatible with Widelands. ¶



##Troubleshooting ¶

### Translations won't work in Ubuntu Linux! ¶

Since Build13 the translation should work if you set the language option to "System default language" and start Widelands in the directory the subdir "locales" lies in, assuming your local language is supported. ¶

If that does not work you can try the following: ¶

1) Edit ~/.widelands/config manually and add .utf8 after your chosen language setting (after you've set it in Widelands, it should be easy to find), e.g. de_DE.utf8, OR ¶

2) Generate the generic locale (e.g. de_DE), using the "old" charset (often in Europe this is ISO-8859-1): sudo locale-gen de_DE ISO-8859-1; sudo dpkg-reconfigure locales ¶

Either one should do the trick. The latter requires root access. ¶


### I downloaded the binary release version for Linux but it does not work. ¶

Most likely a library used by Widelands is not installed or is named differently. To find out which library causes the problem, you should start Widelands in a terminal (open a terminal, change to widelands dir (cd /path/to/widelands), run Widelands with ./widelands) ¶

Now widelands should print some lines like: ¶

~~~~~~~~~~~~~~~ ¶
./widelands: error while loading shared libraries: ¶
libSDL_gfx.so.4: cannot open shared object file: No such file or directory ¶
~~~~~~~~~~~~~~~ ¶

So the problem in this example is that the library "libSDL_gfx" can't be found. The library your system is missing may differ but the steps are still as follows: ¶

Install the missing library (using apt-get, urpmi, ebuild or whatever your distribution supports) and than try to start Widelands again. ¶

If the library was already installed or the same error occurs, you should take a look in /usr/lib and subfolders to see if you can find file named the same, with just a slightly different suffix (for example libSDL_gfx.so or libSDL_gfx.so.16 instead of libSDL_gfx.so.4) ¶

Now you should create a link to the found file (again just an example with libSDL_gfx.so.4 - you should change the names to fit your problem). ¶

Open the terminal again and type: "su" (to get root) and than type "ln -s /usr/lib/libSDL_gfx.so /usr/lib/libSDL_gfx.so.4" ¶

The first filename is the full path to the file you found, the second one the full path to the file Widelands needs - simply change them to fit your problem. ¶

If your system doesn't support the "su" command, try "sudo ln -s /usr/lib/libSDL_gfx.so /usr/lib/libSDL_gfx.so.4" ¶

Now try again to run Widelands via terminal using the ./widelands command -> now either it is working or another library is missing - if first is the case: congratulations, if second: well start again ;-) ¶